Materials Manufacturer
100 Enterprise Street, West Monroe LA 71292
318-325-4376 • FAX 318-325-5734


 Home
  |  About Us  |  Suction Roll Rebuild Kit  |  Aluminum Oxide Spreader Bars  |  Specialty Materials 
SMARTSeal  |  UHMW  |  Get a Quote  |  Distributors  |  Contact Us  |  Paper Industry Info
  |  Polytron®S  |  Finger Joint Design


Download Brochure

  • Flexible, Flexible, Flexible
     
  • Low dynamic coefficient of friction
     
  • Built-in wear gauge
     
  • Excellent wear properties
     
  • Strong
     
  • Rigid enough to be stable in the roll
     
  • Lightweight in handling
     
  • Rapid break-in
     
  • Not brittle
     
  • Easy to install
     
  • Resistant to harsh chemicals
     
  • Base material is strong
     
  • Clean strip
     
  • Leaves no residue

The Polytron® SMARTSeal is designed to meet the needs of the harsh environment inside a Suction Roll without the use of Graphite.  The internal lubricity is provided by Teflon powder embedded within the matrix.

PROOF
Not Promises!

     

Polytron SMARTSeal

ASTM D638 Tensile Strength 13,400 PSI 93N/mm
ASTM D625 Compressive Strength 17,100 PSI 118N/mm
ASTM D790 Flexural Strength/Flexural Modulus 21,900 PSI / 950,000 150N/mm
ASTM D570 Moisture Absorption NII/No Dimensional Change
ASTM D792 Density 1,120 g/cm
ASTM D696 Coefficient of Lineal Thermal Expansion Maximum Operating Temperature 250F° 115C°
ASTM D1894 Coefficient of Kinetic Friction Surface uk w/Teflon on S.S.   0.12
     
                                 


Order the entire Rebuild Kit to complete the job
The Polytron® Guarantee insures the Quality!


We are the only manufacturer that stamps identification numbers into the material... and the only one to offer an unconditional product guarantee!

 

Ask about our..."Seal Strip Performance Analysis"

This program is designed to maximize your efficiency inside your Suction Roll. We follow the performance of our strips after the shipping, after the installation, and after the use.  When the cycle is over, we will report back.

Just another way to get the most value of our products!

Suction Roll Rebuilt Kit | Polytron® Triple Choice Seal Strips | Polytron®K-2 Seal Strips | PolyPV™ Roll Kit | Polytron®S | Finger Joint Design
PolyTube Airload Tubes | Aluminum Oxide Spreader Bar | Airload Tubes | UHMW Polyethelene  |  SMARTSeal
Home About Us  |  Get a Quote  |  Distributors  |  Contact Us  | Downloads |  Site Map  | Paper Industry Info

100 Enterprise Street, West Monroe LA 71292
318-325-4376 • FAX 318-325-5734
Copyright
© 2004 Sawyer Industrial Plastics, Inc.