Products

Here is our Suction Roll Rebuild Kit from start to installation!

Organizing the suction roll parts in a visual, to shipping, to handling & installing.

Our suction roll rebuild kit contains all the components you need to rebuild your paper machines roll kit making the repair as painless as possible.

Suction Roll Seal Strips

Our materials are designed for this harsh environment and the excessive wear. The combination of graphite and Teflon® make our materials the lowest coefficient friction of any other material.

Our materials include ToughLON™, SMARTSeal®, Polytron® K-2, Polytron® A-2 and Polytron® P

ToughLON™ is the closest thing to Teflon® you can get in a wear material! Toughlon™ is the next advancement in materials technology and the most significant change in seal strip materials in 30 years. The homogenous material has the flexibility needed for installation and during use has shown a much longer wear life than the graphite materials.

SMARTSeal® was designed to have internal lubricity without the graphite. The material is the same basic matrix as the Polytron K-2®. The base material is durable and designed to be resistant to chemicals with excellent wear properties. SMARTSeal™ eliminates any problems of streaking on the sheet.

Polytron® K-2 has been in use since 1983 and can be found in many mills throughout the world. This thermoset material is reinforced with an aramid fiber that is vital to the strength and flexibility of the strips. The K-2 comes with the Teflon lubricator bar and has five main functions:

RAPID BREAK-IN OF THE NEW STRIPA small lip of Teflon is left above the upper surface. This lip conforms to any irregularities of the inner surface of the shell and is especially advantageous on a worn shell.NON-ABRASIVEThe Teflon along with the base material is not abrasive and will not wear the shell. The use of Teflon and graphite results in a very low coefficient of friction, lower than any material on the market.AS A WEAR GAUGEThe Teflon bars are machined to a depth of 10mm or 0.375 inches. Thus, when the roll is broken down for maintenance, the condition of the strip can be accurately measured.CONTINUAL LUBRICATIONFrom initial startup to shut down, the combination of Teflon Lubricator bar with the internal graphite assures proper lubrication.ENERGY COST SAVINGS TOOLThe Teflon bars lower the coefficient of kinetic friction between the seal strip and the suction roll, thereby reducing the amperage draw on the machine, and thus reducing Energy Costs.

Polytron® A-2 is a Polytron® material, with the qualities of the K-2, is a more budget friendly material. It is Sawyers 3rd generation of materials and has proved to be an excellent material for most suction roll applications. Just as the Polytron line of products, it is easy to install, excellent wear properties, resistant to chemicals and flexible.

Polytron® P is the Polytron® line of material with a budget price. Many rebuilders like this material as it has the qualities of the Polytron® materials and fits most mills budget. The graphite gives this material an internal lubricity.

PolyTUBE™ Airload Tubes

The Sawyer PolyTUBE™ line of Airload Tube Assemblies are made with Vincon Polyester Tubing and assembled with our special design crimp. The DOUBLE Crimp design assures no leakage while in use.

UHMW Polyethylene Dewatering Elements

Organize your table for easy installation. Let one of our service representatives help you with your application and our Sawyer System of Table Organization.

Sawyer has multiple grades of UHMW Polyethylene, from virgin UHMW to multiple fillers for extended wear. Use the right material for the your application.

• Forming Boards
• Foil Blades
• Flatboxes
• Uhle Box Covers
• Specialty Blades

PolyPV Kits (Pocket Ventilator Kits) come complete with Strips, Rings, Wave Springs, Fasteners and all necessary items required for a rebuild.

This application is in the steam area of the paper machine.

The material used to make the components for the PolyPV Kit is the best on the market, and we can prove this by documented testimonials and years of field testing. Anyone can do their own testing, but out tests are from real world use cases documented by actual customers.

• PolyPV has performed in a roll in excess of 350° F
• PolyPV performs many years without rebuilding
• PolyPV rings and strips are designed for flexibility

Aluminum Oxide Spreader Bars & Shoes

Our Aluminum Oxide Spreader Bars and Shoes are made with over 100 years of materials technology experience. Designed to fit your existing equipment, these are an excellent replacement for bowed rolls.

Made of an aluminum base with ceramic inserts or a composite base with ceramic inserts, this is a worry-free solution for the textile and paper industry.

The different part designs are made to withstand almost any type of condition.

The material provides a strong resistance to wear. Our long-lasting, flexible parts have been used in the industry for over 28 years with total success.

Cygnus Art

Logo Signs & Designs are crafted by Cygnus Art, a division of Sawyer Plastics.

Including unique logo signs, outdoor signs, unique wooden wall scenes, industrial signs and Maintenance Boards, Sawyer has the materials and machining capabilities to make large outdoor/indoor signs including creative logo signs. The materials used for the signage varies with the application. The long lasting materials make it possible to last for many years. All we need is camera ready artwork, the environment of the sign and the size to give you an estimate.

Click any image below to view the full-sized version.

We offer a variety of materials for indoor and outdoor use. Our signage materials (both indoor and outdoor) offer features such as:

• UV stabilized
• Will not swell
• Easily cleaned
• Graffiti resistant
• Resists scratches
• Will not delaminate
• Will not crack or chip
• Never needs painting
• Rhos & REACH compliant